FVP Friction Ready calipers are remanufactured to meet ensure predictable and reliable performance while providing long service life.
Features:
- 100% pressure tested and inspected to guarantee proper operation and fitment
- All guide bolts, pins and seals are replaced, guaranteeing the caliper will function correctly
- Hardware and brackets included (where applicable) to facilitate an easy installation
- Brake pads not included
Installation Tips
- Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Alternate/OEM Part Number(s)
{Alternate Inventory Numbers: 141-34145}
Warranty Information
Warranty Information:Limited Lifetime
CAPA CERTIFIED or NSF CERTIFIED
CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.
| Specifications |
| Mounting Hardware Included |
No |
| Pad Wear Sensor Included |
No |
| Mounting Bracket Included |
Yes |
| Abutment Clips Included |
Yes |
| Bracket Included |
No |
| Inlet Fitting Type |
Bubble |
| Bleeder Install Thread Count in |
5.5 |
| Bleeder Screw Included |
Yes |
| Bleeder Screw Thread Diameter |
10.000 MM |
| Bleeder Screw Thread Size |
M10-1.00 |
| Caliper Casting Material |
Cast Iron |
| Caliper Color |
Gray |
| Caliper Manufacturer |
ATE |
| Caliper Type |
Floating |
| Casting Number |
200P; 24/57; W09209 |
| Inlet Thread Diameter |
10.000 MM |
| Inlet Thread Size |
M10-1.00 |
| Pads Included |
No |
| Piston Diameter |
2.244 in |
| Piston Diameter |
57.000 MM |
| Piston Material |
Steel |
| Piston Quantity |
1 |
| Published Bore Size |
57 |
| Rust Preventative Coating |
Yes |
