Every NuGeon Techshield 360° caliper is remanufactured under the highest quality standards to meet or exceed the specifications required by the original design, and tested during the assembly process for leaks, free moving pistons, and smooth bracket sliding. TechShield 360 is a proprietary electrodeposition coating applied to brake calipers via an automated submersion process.
Features & Benefits:
- The electrodeposition coating is applied via submersion, and not a spray, offering more consistent and uniform coverage of both the housing and the bracket (where included)
- The electrodeposition coating passes a 96-hour continuous salt spray validation test
- The coating is environmentally friendly, heavy metal-free, and OSHA and EPA compliant
- Every caliper is pressure tested to ensure brakes perform at optimum level
- New bleeder screws provide trouble-free bleeding and an air-tight seal
- Pre-lubricated guide bolts on mounting brackets save installation time and prevent seizing
- 100% S.A.E. specific rubber seals ensure like-new performance
- Banjo bolts, copper crush washers and parking brake cable brackets, levers and return springs all preinstalled for easy installation

Installation Tips
- Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Attention California Customers - WARNING: Cancer and Reproductive HarmAttention California Customers - Y
Warranty Information
NUGEON Warranty Information:Limited Lifetime
CAPA CERTIFIED or NSF CERTIFIED
CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.
Specifications |
Hardware Included |
Yes |
Dust Boots Included |
Yes |
New Or Remanufactured |
Remanufactured |
Bracket Included |
Yes |
Inlet Fitting Type |
PLUG |
Bleeder Screw Included |
Yes |
Caliper Casting Material |
Cast Iron |
Caliper Color |
Gray |
Inlet Thread Size |
M10-1.0 |
Pads Included |
No |
Piston Material |
Steel |
Piston Quantity |
1 |
Caliper Finish |
Rust Preventative |
Caliper Slides Included |
Yes |
Anti-Squeal Shims Included |
No |
Bleeder Screw Cap Included |
No |
Bleeder Screw Thread (MM) |
M8-1.25 x 30.2 |
Bleeder Thread Size |
M8-1.25 |
Bracket Mounting Bolts Included |
No |
Caliper And Pad Hardware Included |
No |
Piston 1 Outside Diameter (in) |
2 |
Piston 1 Outside Diameter (mm) |
54 |
Wear Sensors Included |
No |
Inlet Port Thread Size (MM) |
M10-1.0 |
Housing Cast Numbers |
54/22, 804, 698 |