ACDelco Gold (Professional) remanufactured friction ready calipers use both aluminum and iron castings, making them the ideal high quality aftermarket replacement. Developed without attached brake pads, these calipers allow for customization for the application at hand.
Features & Benefits:
- Pressure tested to ensure safe and confident braking
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- Ethylene Propylene (EPDM) rubber components provide superior resistance to heat, corrosion, and leakage
- Developed without attached brake pads for customization
Installation Tips
- Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Alternate/OEM Part Number(s)
OEM / Interchange Numbers: 19141642
Warranty Information
Warranty Information:24 Month / Unlimited Mile WarrantyWarranty Details
CAPA CERTIFIED or NSF CERTIFIED
CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.
| Specifications |
| Mounting Hardware Included |
Yes |
| Pad Wear Sensor Included |
No |
| Finish |
Plain |
| Height (IN) |
6.7 |
| Length (IN) |
9.5 |
| Width (IN) |
6.7 |
| Mounting Bracket Included |
Yes |
| Inlet Fitting Type |
Female |
| Caliper Casting Material |
Cast Iron |
| Caliper Color |
Natural |
| Caliper Type |
Floating |
| Pads Included |
No |
| Inlet Thread Diameter (MM) |
10 |
| Weight (lb) |
7 |
| Caliper Slides Included |
Yes |
| Casting Material |
Cast Iron |
| Bleeder Thread Diameter |
M7x1 |
| Inlet Thread Diameter (IN) |
0.394 |
| Piston 1 Diameter (IN) |
2.1 |
| Piston 1 Diameter (MM) |
53.3 |
