UNITED MOTOR PRODUCTS MAF517

United Motor Products Mass Air Flow Sensors. All substrates utilize digital technology with "state-of-the-art" manufacturing procedures. MAF assemblies are manufactured using ISO and TS certifications, to meet or exceed OEM specifications. Quality control procedures provide consistent performance, longevity and reliability. Housings are made of high density PBT (Polybutylene terephthalate). Qualities include: high heat resistance, chemical resistance, higher tensile and dielectric strength. All units are new construction, not remanufactured.

Features & Benefits:

• MAF assemblies are manufactured using ISO and TS certifications, to meet or exceed OEM specifications
• All sensor electronics utilize digital technology with "state-of-the-art" manufacturing procedures
• Housings are made of high density PBT (Polybutylene terephthalate) or Aluminum to match OE design.
• Each package includes: part, internal anti-static packaging, testing documentation

Check for Vacuum Leaks First!

Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:

• Cracked or loose Vacuum Hoses / Connectors - an audio Stethoscope can help detect air induced sounds from vacuum leaks.
• Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
• Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
• Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
• Cracked Intake Boot (found in the "Engine" category)

Videos

Additional Resources

Warranty Information:5 Years / 50,000 Miles

CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.