BREMBO P06055N

Quantity:

Brand: BREMBO

SKU:{{ product.sku }}

Part Number: {{ product.model }}

Features & Benefits:

Specially designed NAO ceramic compound virtually eliminates brake dust

Each set of pads contain multi-layer ESE (Elastomer – Steel – Elastomer) red shims to minimize vibrations and noise

Additional noise dampening is performed by the backing plate which also acts as a heat shield to reduce heat transfer

Pads are thermal scorched to minimize running-in and fading

A positive molding process uses extreme pressure to compress friction materials and provide balanced bonding to the backing plate

Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material Cost Dust Level Noise Level Stopping Power Pad Life

Organic
$

Semi-Metallic
$$

Ceramic
$$$

Installation Tips

Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose

Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads

Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads

Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow

After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Helpful Tools: Allen Wrench | Brake Bleeder Kit | Brake Bleeder Wrench | Brake Cleaner | Brake Fluid Tester | Breaker Bar | Socket Set | Torque Wrench

Alternate/OEM Part Number(s)

OEM / Interchange Numbers: 34116780711, 34116790759

Warranty Information

Warranty Information:2 years/24,000 miles

CAPA CERTIFIED or NSF CERTIFIED

CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.

Specifications
Brake Lubricant Included	Yes
Chamfered Edges	Yes
Friction Material Composition	Ceramic
Height (MM)	68.4
Width (MM)	155.2
FMSI Number	7799-D1260
Nominal Thickness (MM)	20.3
Prepared For Pad Wear Sensor	Yes
Brake System	Teves