Features & Benefits:
- Application specific formulation for unparalleled performance and reliability
- Premium multi-layer shims for maximum noise damping
- Improved pad wear and durability
- Stainless steel hardware included, where applicable
Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?
A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:
| Brake Pad Material |
Cost |
Dust Level |
Noise Level |
Stopping Power |
Pad Life |
Organic
|
$ |
|
|
 |
 |
Semi-Metallic
|
$$ |
|
|
|
|
Ceramic
|
$$$ |
|
|
|
|
Installation Tips
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - Warning: This product can expose you to chemicals including silica, which is known to the state of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Alternate/OEM Part Number(s)
{Alternate Inventory Numbers: MD1294}OEM / Interchange Numbers: 34114074370, 34116778403, 34116779293, 34116852253, 34116857096
Warranty Information
Warranty Information:Limited Lifetime. Warranty covers defects in materials and workmanship. Normal/uneven wear is not covered
CAPA CERTIFIED or NSF CERTIFIED
CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.
| Specifications |
| Pad Shims Included |
Yes |
| Pad Wear Sensor Included |
No |
| Friction Material |
Metallic |
| Mounting Hardware |
Not Included |
| Pad Assembly Thickness, Inner Overall (IN) |
0.738 |
| Pad Assembly Thickness, Outer Overall (IN) |
0.755 |
| Plate Height, Inner (IN) |
2.950 |
| Plate Height, Outer (IN) |
2.950 |
| Plate Length, Inner (IN) |
6.735 |
| Plate Length, Outer (IN) |
6.700 |
| Friction Material Attachment Type |
Integrally Molded |
| Friction Material Slot Type |
Unslotted |
| Pad Chamfered |
Yes |
| Pad Shim Attachment Type |
Staked |
| Pad Shims Attached |
Yes |
| Pad Wear Sensor Attached |
No |
